USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY
MLS Canada Logo Members Of Spanner Site Search Help USED WOODWORKING MACHINERY
Sign Up USED WOODWORKING MACHINERY
MLS Machinery United States USED WOODWORKING MACHINERY
Contact Us USED WOODWORKING MACHINERY
Login USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY
   

Online Catalog - New Machinery 

 Site Languages:  Français Deutsch Español Italiano Chinese Russian Vietnamese
Credit Cards Accepted: MasterCard Visa
USED WOODWORKING MACHINERY
USED WOODWORKING MACHINERY
USED WOODWORKING MACHINERY
USED WOODWORKING MACHINERY

Page 1 of 1  << First Page | < Prev. Page | Next Page > | Last Page >> 
FOX [C3] - SEMI-AUTOMATIC LOW PROFILE TURNTABLE PALLET WRAPPER  Inventory #12589
MLS MACHINE DATA
  • Capacity large formed heavy duty steel tower.
  • Rigid unibody base frame construction (formed lift tubes full length welded to base 5/16" steel plate).
  • 5/16" flat steel base plate (thickest gauge in industry for this machine model) 56" diameter 3/8" steel plate with full base frame 60" surround.
  • 20 Table support bearings requiring no lubrication (600lbs dynamic each wheel) heavy duty #50 chain and sprocket drive system.
  • 3-1/8" from floor to top of turntable.
  • Maximum load size: 55" x 55" (78" diagonal x 90" high).
  • Weight capacity 4,000 lbs dynamic (20,000 lbs static).
  • PLC with back lit LCD screen and E-prom memory.
  • LCD screen providing detailed functions and control viewing.
  • Flush mount control panel (electronics built into tower).
  • Panel face screen printed (details button functions & operation).
  • Power on / off switch and indicator light.
  • Large Emergency push button power On / Off switch with indicator light.
  • Start cycle push button.
  • Standard wrap up / down program.
  • Separate top and bottom wrap selectors (1-10).
  • Separate film height over load selector (1"-10").
  • Reinforce wrap function (2 wraps).
  • Cycle counter (keeps track of each load wrapped).
  • Electronic film force to load control on panel.
  • Variable turntable rotation speed control (0-14 RPM).
  • Variable speed carriage up / down control.
  • Manual carriage raise and lower push buttons.
  • Turntable jog control with auto alignment feature.
  • PLC with LCD SCREEN built in current overload.
  • Protection and permanent E-Prom memory.
  • 24 Volt control systems (for operator safety).
  • Circuit breakers on the panel face for main power and DC drive boards.
  • Nonproprietary.
  • User-friendly push button and switches.
  • FILM DELIVERY: FOX "Linear" 20 inch powered prestretch film delivery system.
  • Easy thread film carriage.
  • No hinges.
  • Latches or idler rollers to wear and cause inconsistent film stretching electronic film force control on panel.
  • Adjustable mechanical force to load.
  • Linear analog proximity sensor film feed speed control.
  • 1/2 HP DC SCR variable speed film drive.
  • Heavy duty ANSI chain & sprocket gearing.
  • Prestretch 50-300% upon request (200% standard settings).
  • Triple beam auto height eye capable of recognizing all colours including black.
  • CARRIAGE LIFT: heavy duty ANSI #50 chain carriage lift.
  • 1/2 HP DC SCR variable speed drive.
  • V-groove bearing wheels support providing effortless movement (Qty 4).
  • STRUCTURAL FEATURES: fork lift portable front or rear.
  • Formed steel tower.
  • Rigid unibody base frame construction.
  • TURNTABLE DRIVE: 0 - 14 RPM turntable speed.
  • 1/2 HP DCR SCR variable speed drive.
  • Adjustable electronic soft start / stop.
  • Additional $500(Can) for ramp...
View Specifications >
Learn about Machines of Interest to Me >
FOX [FOX 4] - SEMI-AUTOMATIC PALLET WRAPPER  Inventory #13999
MLS MACHINE DATA
  • Capacity PLC with back lit LCD screen and E-prom memory.
  • LCD screen providing detailed functions and control viewing.
  • Flush mounted control panel (electronics built into tower).
  • With detailed operations printed on panel face.
  • Panel face screen printed (details button function & operation).
  • Power on/off switch and indicator light.
  • Large emergency push button power on/off switch with indicator light.
  • Start cycle push button.
  • Standard wrap up/down program.
  • Separate top and bottom wrap selectors (1-10).
  • Separate film height over load selector (1"-10").
  • Variable turntable rotation speed control (0-14 RPM).
  • Variable speed carriage up/down control.
  • Reiforce wrap function (2 wraps).
  • Top sheet cover pause button.
  • Cycle counter (keeps track of each load wrapped).
  • Electronic film force to load control on panel.
  • Manual carriage raise and lower push buttons.
  • Turntable jog control with auto alignment feature.
  • PLC with LCD screen built in current overload protection and permanaent E-prom memory.
  • Diagnostic screen for easy trouble shooting.
  • 24 Volt control systems (for operator safety).
  • Circuit breakers on the panel face for main power and DC drive boards.
  • Nonproprietary user-friendly push button and switches.
  • Film Delivery: FOX "Linear" 20 inch powered pre-stretch film delivery system.
  • Easy thread film carriage.
  • No hinges latches or idler roller to wear and cause inconsistent film stretching.
  • Electronic film force control on panel.
  • Adjustable mechanical force to load.
  • Linear analog proximity sensor film feed speed control.
  • 1/2 HP DC SCR variable speed film drive.
  • Pre-stretch 50 - 300% upon request (200% standard setting).
  • Triple beam auto height eye capable of recognizing all colours including black.
  • Turntable Drive: 0 - 14 RPM turntable speed.
  • 3/4 HP DCR SCR variable speed drive.
  • Adjustable electronic soft start/stop.
  • FOX 4 High Profile: HHS base frame construction 52" octagonal turntable C/W 4" skirt.
  • 4 swivel caster support system (2000 lbs capacity each).
  • No face lubrication required.
  • Heavy duty #60 chain & sprocket drive system.
  • Lubrication points on caster roller bearings and swivels.
  • 10-7/8" from floor to top of turntable.
  • Weight capacity 4,000 lbs dynamic (10,000 lbs static).
  • Will accommodate large load size 48" x 96".
  • Technical Information" PLC with LCD display (displays function control).
  • Complete manual with electrical schematic.
  • All switches.
  • Relays SCR controls etc. are available locally throughout North America.
  • 115 VAC @ 15 Amp.
  • 60 Hz.
  • Machine modified with 52" diameter t/table & extended base.
  • Use with tow motor loading...
View Specifications >
Learn about Machines of Interest to Me >
FOX [R360] - AUTOMATIC RING WRAPPER  Inventory #16234
MLS MACHINE DATA
  • Capacity automatic wrapper to accomodate product max. width 45" x max. height 36".
  • Max. length 36" and up.
  • Controls: main panel Nema 12 (36" x 36" cabinet on each unit).
  • Mitsubishi PLC.
  • Touch screen operation selection (Nais).
  • Main 575 Volt // 3 Phase // 60 Hz // 20 Amp disconnect switch.
  • Main fuses 20a.
  • Auto/manual selector switch.
  • Main control power push illuminated button.
  • Safety lockout switch on door (shuts off control power).
  • Open/close film clamp.
  • Jog ring push button.
  • Jog in feed conveyor.
  • Jog exit conveyor.
  • All controls 24 Volt DC.
  • Ring drive motor 3 HP AC frequency drive.
  • A/C tech 5 HP controller.
  • Photo-eye sensor for carriage home positioning and end band counter.
  • Full detailed electrical schematic.
  • Electrical controls name brand.
  • Obtainable from local suppliers.
  • Ring: 60" ID ring bearing - timing belt drive.
  • Ring speed variable from 0 to 45 RPM.
  • Pass through height of product at 40".
  • Ring support frame 1/2" steel plate reinforced with 3" x 3" x 3/16" HSS tube.
  • Mechanics: pneumatic film cut with hot wire impulse cutter.
  • Heavy duty 3" x 3" x 3/16" HSS tubing frame consturction.
  • Fully guarded for operator protection.
  • Standard name brand parts which can be obtained from local supplier.
  • In-Feed and Exit Belt: 8' belt conveyor with 48 wide rough top belt in-feed and 8' long belt conveyor with 48 wide rough top belt at exit.
  • 6" head roller & 4" tail roller.
  • Speed 0 - 15 feet/min.
  • 1 HP DC variable speed motor and controls.
  • Soft start/stop control.
  • Auto indexing of loads by photo eyes.
  • Film Carriage: 10" Fox LINEAR pre-stretch film carriage.
  • Supports film rolls 10" long x 10" diameter.
  • Easy fill tensioning adjustment on carriage control.
  • 1/2 HP DC 90 Volt motor film delivery drive.
  • Power provided to film carriage by slip rings.
  • Film prestretch set at 200% by factory.
  • Delivery 10 to 11 weeks from date of purchase order and deposit.
  • Warranty: 2 years on parts.
  • Customers misuse or lack of maintenance will void parts warranty.
  • Labor not included.
  • These machines can not be operated out doors...
View Specifications >
Learn about Machines of Interest to Me >
FOX [7] - ROTARY ARM PALLET WRAPPER  Inventory #18353
MLS MACHINE DATA
  • Capacity control features PLC with back lit LCD screen built in current overload protection and permanent E-Prom memory.
  • LCD display screen providing detailed function control viewing with detailed operations printed on panel face for easy operator reference.
  • Large Emergency push button power On/Off switch with indicator light.
  • CSA & UL approved NEMA 4 control panel box.
  • Start cycle push button.
  • Wrap up / down program / Wrap up only selector on PLC screen.
  • Separate top and bottom wrap selectors (1-10).
  • Separate film height over load selector (1"-10").
  • Variable arm rotation speed control (0-12 RPM).
  • Variable speed carriage up / down control.
  • Reinforce wrap function.
  • Top cover pause.
  • Cycle counter (keeps track of each load wrapped).
  • Electronic film force to load control on panel.
  • Manual carriage raise and lower push buttons.
  • Arm jog control with auto alignment feature.
  • 24 Volt control systems (for operator safety).
  • Circuit breakers on the panel face for main power and DC drive boards.
  • Soft start / stop DC drives.
  • Non proprietary.
  • User-friendly push button and switches.
  • Technical information all switches.
  • Relays.
  • SCR controls are available locally throughout North America.
  • Power Requirements: 115 VAC @ 15 Amps.
  • 60 Hz.
  • Complete manual with electrical schematic provided with machine.
  • Film delivery FOX "Linear" 20 inch powered pre-stretch film delivery system.
  • Easy thread film carriage.
  • No hinges.
  • Latches or idler rollers to wear and cause inconsistent film stretching.
  • Electronic film force control on panel.
  • Adjustable mechanical force to load.
  • Linear analog proximity sensor film feed speed control.
  • 1/2 HP DC SCR variable speed film drive.
  • Pre-stretch 50-300% upon request (200% standard settings).
  • Triple beam auto height eye capable of recognizing all colors including black.
  • 3 leg grantry style.
  • Carriage lift V Groove wheel supports providing effortless movement and maximum stability (Qty4).
  • Heavy duty ANSI #50 chain carriage lift.
  • 1/2 HP DC SCR variable speed drive.
  • Fox 7 rotary arm pallet wrapper.
  • 15 Precision Ring Gear - 25,000lb load supporting capacity.
  • Pinion drive gear.
  • Heavy duty structural steel tube construction.
  • Suggested Maximum Load Size 50" L x 50" W.
  • (72" Diagonal) x 80" High.
  • Weight capacity unlimited.
  • Arm drive 0 - 12 RPM Arm Speed.
  • 1/2 HP SCR variable speed.
  • Adjustable electronic soft start / stop.
  • Positive home position alignment.
  • Safety beam proceding rotating tower provides.
  • Emergency stop in the event of obstruction.
  • (stop distance 8").
  • Structural full length back frame for floor support.
  • Designed for easy installation against support beam or supporting wall.
  • Free standing models available.
  • Heavy duty structural steel tube construction.
  • OPTIONS rotary arm main frame increase.
  • (to increase size of package to 48" X 108" mast needs increase by 46" - $1,950 Canadian).
  • Height increase.
  • (to increase height of package from 80" - 96" $800 Canadian).
  • Free standing style.
  • Gantry stand with 3 or 4 legs.
  • (3 legs $1,400 Canadian).
  • Automatic end of cycle film cut off...
View Specifications >
Learn about Machines of Interest to Me >
FOX [C1] - SEMI-AUTOMATIC PALLET WRAPPER  Inventory #19879
MLS MACHINE DATA
  • Capacity 5000 lb. weight bearing.
  • Variable speed film carriage and turntable 0 to 15 RPM with 1/2 HP SCR variable drive.
  • Separate top & bottom wrap selector1 - 9.
  • Separate film height selector 1-9".
  • Photo-eye for load height sensing.
  • 90" wrap height.
  • Uses 20" machine film with 100% stretch.
  • Machine features the most rugged base frame in the industry.Programmable Key pad controls with LCD display.
  • Cycle counter.
  • Manual raised and lower carriage control.
  • Turntable jog with auto home aligment.
  • Large emergency push button power on/off switch with indicator light.
  • Standard wrap up/down program.
  • 12 Volts DC control system (for operator safety).
  • Fork lift portable from rear.
  • Table 56" diameter with 24" clearence from post...
View Specifications >
Learn about Machines of Interest to Me >
FOX [1L] - TURNTABLE  Inventory #20237
MLS MACHINE DATA
  • Capacity rigid base frame construction.
  • 2 3/4" from floor to top of turntable.
  • Suggested maximum load size 55" x 55...
View Specifications >
Learn about Machines of Interest to Me >
FOX [C3 WITH TOP PLATEN] - SEMI-AUTOMATIC WRAPPER WITH TOP PLATEN  Inventory #20242
MLS MACHINE DATA
  • Capacity large formed heavy duty steel tower.
  • Rigid unibody base frame construction (formed lift tubes full length welded to base 5/16" steel plate).
  • 5/16" flat steel base plate (thickest gauge in industry for this machine model) 56" diameter 3/8" steel plate with full base frame 60" surround.
  • 40 Table support wheels requiring no lubrication (600lbs dynamic each wheel) heavy duty #50 chain and sprocket drive system.
  • 3-1/8" from floor to top of turntable.
  • Maximum load size: 55" x 55" (78" diagonal x 96" (optional height) .
  • Weight capacity 5,000 lbs dynamic (20,000 lbs static).
  • Programmable key pad controls.
  • LCD display screen (providing detailed function and control viewing).
  • Flush mount control panel (electronics built into tower).
  • Panel face screen printed (details button functions & operation).
  • Power on / off switch and indicator light.
  • Large Emergency push button power On / Off switch with indicator light.
  • Start cycle push button.
  • Standard wrap up / down program.
  • Separate top and bottom wrap selectors (1-10).
  • Separate film height over load selector (1"-10").
  • Reinforce wrap function (2 wraps).
  • Cycle counter (keeps track of each load wrapped).
  • Electronic film force to load control on panel.
  • Variable turntable rotation speed control (0-14 RPM).
  • Variable speed carriage up / down control.
  • Manual carriage raise and lower push buttons.
  • Turntable jog control with auto alignment feature.
  • PLC with LCD SCREEN built in current overload.
  • Protection and permanent E-Prom memory.
  • 24 Volt control systems (for operator safety).
  • Circuit breakers on the panel face for main power and DC drive boards.
  • Nonproprietary.
  • User-friendly push button and switches.
  • FILM DELIVERY: FOX "Linear" 20 inch powered prestretch film delivery system.
  • Easy thread film carriage.
  • No hinges.
  • Latches or idler rollers to wear and cause inconsistent film stretching electronic film force control on panel.
  • Adjustable mechanical force to load.
  • Linear analog proximity sensor film feed speed control.
  • 1/2 HP DC SCR variable speed film drive.
  • Heavy duty ANSI chain & sprocket gearing.
  • Prestretch 50-300% upon request (200% standard settings).
  • Triple beam auto height eye capable of recognizing all colours including black.
  • CARRIAGE LIFT: heavy duty ANSI #50 chain carriage lift.
  • 1/2 HP DC SCR variable speed drive.
  • V-groove bearing wheels support providing effortless movement (Qty 4).
  • STRUCTURAL FEATURES: fork lift portable front or rear.
  • Formed steel tower.
  • Rigid unibody base frame construction.
  • TURNTABLE DRIVE: 0 - 14 RPM turntable speed.
  • 1/2 HP DCR SCR variable speed drive.
  • Adjustable electronic soft start / stop.
  • Additional $500(Can) for ramp...
View Specifications >
Learn about Machines of Interest to Me >
FOX [C3PA] - FULLY AUTOMATIC PORTABLE WRAPPER  Inventory #20236
MLS MACHINE DATA
  • Capacity clamps/cuts & wipes (Pneumatic operated).
  • Fox unique cam operated film clamp assembly on FOX C3PA.
  • Fox "Linear" 20 inch powered pre-stretch film delivery system.
  • Suggested maximum load size 48"L x 54"W x 90" High.
  • 3 1/8" from floor to top of...
View Specifications >
Learn about Machines of Interest to Me >
FOX [MLP] - MANUAL WRAPPER  Inventory #20234
MLS MACHINE DATA
  • Capacity rigid base frame construction.
  • Counter balanced film carrige for ease of lifting by operator (non powered lift).
  • Friction dispenser film carriage ( 14" to 20" film web width).
  • 11" from floor to top of turntable.
  • Four swivel table support casters (swivel casters eliminate excessive wear) suggested maximum load size 52"L x 52"W (72" Diagonal) x 74" High...
View Specifications >
Learn about Machines of Interest to Me >
FOX [9] - CHAIR LEGS SPECIAL WRAPPER  Inventory #20258
MLS MACHINE DATA
  • Office chair legs stacked on mandrel.
  • Bands legs with 10" film.
  • Automatically applies and cuts film.
  • Film carriage moves vertically and horizontally.
  • Stretch wrapped bundle is secured.
  • Customer eliminated corrugated and other consumables...
View Specifications >
Learn about Machines of Interest to Me >
ART [MONET] - 5' X 5' CNC ROUTER  Inventory #18192
MLS MACHINE DATA
  • Capacity ART 1500 is a 3+1 axes CNC machining center designed to cut and mill extruded composite, utilizing nested based manufacturing technology.
  • Plastic and aluminum materials.
  • FRAME Made from a combination of tubing and fabricated plates.
  • Tubes have minimum of 9 mm wall thickness.
  • Stress relieved and sand blasted for final finishing.
  • TABLE: Combination of ribbed tubes and plates machined and finished with grooved phenolic tabletop.
  • OPTIONAL LOCATING PINS: Combination of 2 sides and 2 fronts.
  • Heavy duty locating pins controlled through program for squaring the piece on the table.
  • AXES DESCRIPTION AXIS 1: X AXIS moves back and forth along the length of the machine.
  • AXIS 2: Y AXIS moves back and forth along the width of the machine.
  • AXIS 3: Z AXIS moves up and down along the height of the machine.
  • AXIS 4: SPINDLE AXIS is to adjust the speed of spindle.
  • The spindle can turn from 3000-24000 RPM and this speed is selectable through the program.
  • AXIS 5: Spindle axis is to monitor and adjust the position of the spindle at any given moment.
  • GENERAL DESCRIPTION OF THE MACHINE A double sided supported gantry type machining center with the following specifications: Work area: X=61"/Y=61"/Z=8".
  • Traverse speed:(Maximum point-point positioning speed) X=70 m/min., Y=70 m/min., Z=40 m/min.
  • AXIS 1 (X) DESCRIPTION (INCLUDED) X is a linear axis along the length of the machine moving to back and forth of the work area.
  • This axis is directly connected to a high precision planetary gearbox eliminating pulley and belt system hence adding higher accuracy and reliability.
  • X-Axis mounted on four sets of four rows size (25) linear bearings and rail system.
  • Power and transmission on the X-Axis is provided by a powerful 1.5 kW digital.
  • Brush less AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
  • X-Axis is coupled to a high precision module 2 helical ground rack and pinion with zero backlash for ultimate accuracy and reliability.
  • AXIS 2 (Y) DESCRIPTION (INCLUDED) Y is a linear axis along the width of the machine moving to left and the right of the work area.
  • This axis is directly connected to a high precision planetary gearbox eliminating pulley and belt system hence adding higher accuracy and reliability.
  • Y-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
  • Power and transmission on the Y-Axis is provided by a powerful 1.5 kW digital brush less AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
  • Y-Axis is coupled to a high precision helical grounded rack and pinion for ultimate accuracy and reliability.
  • AXIS 3 (Z) DESCRIPTION (INCLUDED) Z is a vertical axis along the height of the machine up and down of the work area.
  • This axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability.
  • Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system.
  • Power and transmission on the Z-Axis is provided by a powerful 900W digital brush less AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
  • Z-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability.
  • Z-Axis is balanced with two pneumatic counterbalance cylinders for high repeatability and positioning speed.
  • AXIS 4 (SPINDLE SPEED) Spindle speed axis is a virtual axis.
  • Commanding proper speed to the spindle drive.
  • Machine is equipped with variable speed spindle.
  • Which can turn from a minimum of 3000 RPM to a maximum speed of 24000 RPM The spindle speed is configurable through the programming menu.
  • SPINDLE MOTOR Standard air cooled, 4 poles ER-32 spindle motor for this application.
  • Power of the spindle can be from 5.5 kW to 7.5 kW at 380V. (Included) Optional air cooled.
  • 4 poles ISO-30 spindle motor for this application.
  • Power of the spindle can be from 5.5 kW to 7.5 kW at 380V.
  • Optional liquid cooled, 4 poles HSK F-63 spindle motor for this application.
  • The HSK series of spindle provides the ultimate hold on the tool and that results to better finish in cuts and longer duty cycle.
  • The spindle bearings are cooled by a heat exchange unit (included) resulting to more reliability and less downtime due to spindle failure.
  • Power of the spindle can be from 5.5 kW to 7.5 kW at 380V.
  • OPTIONAL AUTOMATIC TOOL CHANGE (ATC) Stationary bar type HSK-F63 or ISO-30 ATC with 10 tools capacity.
  • Stationary sliding bar type HSK-F63 or ISO-30 ATC with 10 tools capacity.
  • Rotary type ISO-30 or HSK-F63 ATC with 10 tools capacity.
  • Tool crib is located on the left side of the x-axis. (HSK tool holders.
  • Collets and tooling is not included) OPTIONAL DRILLING UNIT Independent drilling units with the following specifications: 7+2 vertical and 3x2 horizontal drilling unit 7+2 vertical and 2x2 horizontal and a saw @ 0° 9+6 vertical and 3x2 horizontal Saw unit rotating from 0° to 180°s.
  • ELECTRICAL CABINET (INCLUDED) All of our electrical components are CSA and CUL approved.
  • The electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership.
  • Our electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform.
  • We use high flex shielded cables for all connections.
  • The cables are carried by all enclosed cable tracks to protect them from chips and external elements.
  • The whole electrical system is approved by Ontario hydro and carries approval sticker.
  • CONTROL SYSTEM (INCLUDED), OPTIONAL HANDHELD PENDANT equipped with the following functions: Jog function on X/Y and Z axis enables the operator to jog the machine in forward and reverse mode.
  • Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece.
  • Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program.
  • Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes.
  • OPTIONAL SAFETY BARRIER installed at the front of the machine activated when crossed and pauses all existing motions and resets by resume button.
  • This option is an excellent safety feature to protect the operator from accidental contact with moving axes.
  • OTHER SPECIFICATION Power requirements for Canada : 600V 3 Phases at 35Amps.
  • Air requirements: 7 bars or 100 psi.
  • Power requirements for U.S.A : 460V 3 Phases at 50 Amps.
  • Air requirements: 7 bars or 100 psi.
  • Power requirements for Europe and Asia...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [APSFL32M] - 10' FRONT LOAD PANEL SAW WITH PUSHER  Inventory #21102
MLS MACHINE DATA
  • Capacity front load 3,200 mm (10.5') panel saw C/W electronic pusher with PLC controls, maximum saw blade size 455 mm (18").
  • Scoring blade size 180 mm, main motor drive 15 HP, scoring motor drive 1 HP, main carriage motor 2 HP with frequency changer to adjust variable speed of the carriage.
  • Cutting speed 0-30 meters/min. (0-100'/min.), saw blade rotation 5,000 RPM.
  • Scoring blade rotation 6,000 RPM, saw blade projection 130 mm (5"), C/W 3 front air floatation tables.
  • (optional can be supplied with 3 conveyor tables instead of the air floatation tables deduct from price $1500 US/ $1,800 Canadian), 2 hardened steel beams to support the saw carriage for accuracy and alignment.
  • For further information please contact us...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AEBC] - CONTOUR EDGEBANDER  Inventory #20738
MLS MACHINE DATA
  • Capacity contour edgebander for straight or round curved pieces, for PVC.
  • Melamine or veneer coils, maximum edgebanding thickness 0.4 - 3 mm, edgebanding height 10-60 mm, mimimum arc radius 20 mm, bottom mounted glue pot under the table, 4 pressure rubber rollers and one applicator roller for straight pieces.
  • The 4 rolls are removable for contour edgebanding work, feed speed 1-14 M/Min, speed and temperature adjustments from the front of the machine, foot pedal control, supplied with an encoder for automatic length cut off, phenolic table base...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AEB4HD] - 3 MM PVC SINGLE SIDED EDGEBANDER WITH END TRIM, TOP BOTTOM FINE TRIM, SCRAPING AND BUFFING  Inventory #20715
MLS MACHINE DATA
">
  • Capacity end trim.
  • Top and bottom fine trim.
  • Scraping and buffing, PLC controlled, 200 Hz electronic frequency converter, .4 - 3 mm band thickness.
  • Maximum width of edgebanding 3 mm x 60 mm high, panel thickness 10 mm - 60 mm, minimum panel width 80 mm (3.5"), 4 kg bottom mounted glue pot.
  • Edgebanding coil feeds automatically to a maximum of 3 mm thick through a high powered guillotine, 5 roll pressure section, workstations include double motor end trim 0.35 kW (1/2 HP) at 12,000 RPM each, top and bottom fine trimming 0.7 kW (1 HP) at 12,000 RPM, top and bottom scraping unit with pressure disk to avoid damaging the material with air blowers to remove residue, top & bottom buffing unit which tilts 0° - 5° with air cleaning, 3 HP variable feed speed 12-40 M/Min (40-130 Ft/min.), double rubber roller pressure beam, automatic panel thickness protection, supplied with remote control jogging switch for ease of set up, C/W sound enclosure and outboard control panel...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSP62] - 62" TOP AND BOTTOM GLUE SPREADER C/W VARIABLE SPEED  Inventory #20733
MLS MACHINE DATA
  • Capacity 1,600 mm (62") 4 roll top and bottom glue spreader.
  • Mechanical digital indicator.
  • 2 rubber rollers and 2 stainless steel doctor rollers, 7.5" diameter rubber rollers, shafts are made from hardened stainless steel, 6" diameter doctor rollers, manual fine adjustment controls, infinitely variable speed drive, maximum material thickness 80 mm (3.1"), 2.2 kW (3 HP) main drive motor, water wash cleaning system with single water connection and shut off to connect to main water inlet, safety shut off cord along the full length of the machine, safety covers over the glue rollers...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSPC] - 400 MM ( 15-3/4")CONVEYORIZED GLUE SPREADER  Inventory #20732
MLS MACHINE DATA
  • Capacity conveyorized glue spreader, 400 mm (15 3/4") wide, conveyor with approx. 4' long infeed & 8' long outfeed, drip pan underneath the slat conveyor with angle iron jaggered tooth (to grip the material) slats mounted on approx. 3" centers, 0.75 kW (1 HP) drive motor, 10 M/min. feed speed, glue is poured into the pan under conveyor pick-up roller (doctor roller) which moves the glue to the applicator roller where it is transferred to the product, quantity of glue applied is determined by adjustment between pick-up roller and applicator roller, applicator roller is 130 mm diameter (5"), the glue applicator system is driven by a 0.75 kW (1 HP) motor, includes control panel with on/off buttons and a limit switch to automatically stop the pieces when they reach the end of the machine...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AM46] - THROUGH FEED MOULDER 4-HEAD 6" X 4" (B,R,L,T)  Inventory #20555
MLS MACHINE DATA
  • Capacity 4-Head Profile or "S4S" Moulder (B,R,L,T), 150 mm X 100 mm (6" x 4") height/width, head sequence bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 10 HP, mono-block cast iron bed, all heads have radial and axial adjustments with mechanical digital readouts on important spindle adjustments, all spindles 40 mm diameter at 7,000 RPM, variable feed speed of 20 to 78 FPM, 3 HP feed drive motor, (1) 5-1/2" diameter top, (1) 4" diameter & (1) 3-3/4" diameter bottom powered feed rollers, 4' infeed straightening table with adjustable fence line, chromed bed plates and fence line, control panel, pressure rollers and pressure plate, chipbreaker & full sound enclosure, centralized lubrication system...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AM58] - MOULDER 5-HEAD 7" X 4" (B, R, L, T, B)  Inventory #20556
MLS MACHINE DATA
  • Capacity through feed 5-Head (B-R-L-T-B), 7" x 4" width/thickness, head sequence bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 15 HP, bottom 10 HP, mono-block cast iron bed, all spindles have radial & axial adjustments with mechanical digital readouts, all spindles 40 mm diameter at 7,000 RPM, variable feed speed of 20 - 78 FPM, 4 HP feed drive motor, (1) 5-1/2" diameter top.
  • (1) 4" diameter & (1) 3-3/4" diameter bottom powered feed rollers, 2 meter (78") infeed straightening table with adjustable fence line, chromed bed plates and fence line, C/W control panel, chipbreaker, central lubrication system and full sound enclosure.
  • This machine comes C/W manual...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AM69] - MOULDER 6-HEAD 9" X 6" (B,R,L,T,T,B)  Inventory #20557
MLS MACHINE DATA
  • Capacity 6-Head (B,R,L,T,T,B), 9" x 6" width/thickness.
  • Head sequence bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP, bottom 15 HP, mono-block cast iron bed, all heads have radial and axial adjustments with mechanical digital readouts on important spindle adjustments.
  • All spindles 40 mm diameter at 7,000 RPM.
  • Variable feed speed of 18 to 75 FPM.
  • 5 HP feed drive motor.
  • 5-1/2" diameter top and three sets of 4" diameter and 3-3/4" diameter bottom powered feed rollers for upgraded feeding performance.
  • 2 HP feed beam elevation motor.
  • 2 meter (6-1/2') infeed straightening table with adjustable fence line, chromed bed plates and fence line.
  • Centralized control panel & lubrication.
  • Pressure rollers and pressure plate.
  • Chipbreakers & full sound enclosure.
  • This machine comes C/W manual and tools...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [APTB17] - 17" DOUBLE SIDED PLANER  Inventory #20558
MLS MACHINE DATA
  • Capacity 17" max. width.
  • 6-3/4" max. thickness.
  • Min. working length 9".
  • Feed speed 3 - 20 m/min.
  • Top cutterhead motor 10 HP.
  • Bottom cutterhead motor 10 HP.
  • Feed motor 2 HP.
  • Elevating motor 1/2 HP...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [APTB24] - 24" DOUBLE SURFACE PLANER  Inventory #20545
MLS MACHINE DATA
  • Capacity 24" double surface planer.
  • Solid cast construction.
  • Chrome hardened tables.
  • Maximum width of planer 610 mm (24").
  • Maximum thickness capacity 170 mm (7").
  • Minimum length capacity 310 mm (12").
  • Cutterhead diameter 125 mm (5").
  • Cutterhead speed 6000 RPM.
  • Feed speed 7 - 16 m/min.
  • 5 table rollers.
  • Table surface 27" x 103".
  • Top cutterhead motor 20 HP.
  • Bottom cutterhead motor 15 HP.
  • Feed motor 5 HP.
  • Table elevation motor 1.5 HP.
  • Elevating screw diameter (4) 1-1/4".
  • Spring loaded heat treated pressure fingers.
  • 52 section conveyor for feeding wood pieces to produce flat surface and desired thickness for edge gluing.
  • Chrome hardened tables.
  • Powered and idle bottom rollers.
  • Central lubrication for column screws and slide ways.
  • Digital thickness setting.
  • Auto thickness device.
  • Spiral cutter head 125 mm with replaceable carbide knives with self locking screws.
  • CSA electrical components.
  • Rubber out feed roll.
  • Includes pneumatic driver for changing carbide knives in cutter head...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ACPTF510HD] - THROUGH FEED COLD PRESS LINE 72" DAYLIGHT OPENING 5' X 10' C/W CONVEYORS  Inventory #20470
MLS MACHINE DATA
  • Capacity end loading cold press, with platen size 3200 mm x 1600 mm (5' X 10'), opening daylight 1850 mm (6'), 3 cylinders with a stroke of 1600 mm X 200 mm (5' X 8") diameter, 150 ton, all electrics CSA approved, special safety requirements must be specified by the customer at time of order, supplied with safety cord on both sides of the press, hydraulic pump 7.5 kW to allow a package of approx. 4,000 kg. to be transferred through the press on retractable rollers chain driven in the bed of the press located in 2 rows of approx. 6 rollers each, roller bed conveyor feed at approx 20m/min. with a 2.2 kW motor, supplied with one outfeed or infeed powered driven roller conveyor to load or unload the press (a second infeed/outfeed roller can be supplied if requested), supplied with one 3 kW motor and measuring approx. 3200 mm X 1600 mm.
  • Note this machine must be loaded into an open top container, the price above includes packaging and freight to West Coast US or West Coast Canadian port.
  • As we are constantly striving to improve our products we reserve the right to change or modify the specifications without prior notice...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AHP5101] - 5' X 10' SINGLE OPENING HOT PRESS C/W SOLID STEEL DRILLED PLATENS  Inventory #20670
MLS MACHINE DATA
  • Capacity single opening 3,200 mm X 1,600 mm (5' X 10') side loading hot press, steel drilled platens, oil heated C/W a 45 kW boiler and 2.2 kW pump to 120°s centigrade, 8 cylinders each one being 100 mm in diameter X 300 mm stroke, 160 ton pressure, 300 mm daylight, CSA certified electrical components, control panel on right hand column of machine, panel includes powered open and close.
  • Thermostat.
  • Timer and pressure gauge, safety cable around the complete perimeter of the machine...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AMP49] - MEMBRANELESS VACUUM PRESS 4' X 9.5' WITH SHUTTLE TABLE  Inventory #21019
MLS MACHINE DATA
  • Capacity 3000 x 1350 mm (118" x 53") usable working table size, side loading on the 118" side, lay up shuttle table from the front of the machine, the lay up table is mounted on a set of legs with a sliding mechanisim.
  • The vacuum comparment is lifted manually with the support of 2 shock absorbers, the press is membraneless.
  • The laminate that is being laid up acts as the membrane, the laminate is placed in the top of the vaccum chamber with the parts to be laminated placed on the lay up table, the laminate is heated with top mounted heaters and the vacuum used to do the actual lamination comes from underneath the table, once the lay up procedure is complete the vacuum chamber is pushed manually into the press, the control panel is sided mounted with the following controls and gauges, Voltage meter.
  • 3 zone current meters.
  • Adjustable pre heat time with LED readout.
  • Adjustable temperature controls with LED readouts.
  • Adjustable pressing time with LED readouts.
  • Main heat control switch.
  • Vacuum control switch.
  • Press opening and closing switch, total power consumption 10 kW in set up mode and 3 kW during operation, vacuum -0.1 Mpa, there is an observation window from the front of the machine...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ARSMTF] - MULTIPLE RIP FRAME SAW FOR CUTTING THIN MATERIAL  Inventory #21020
MLS MACHINE DATA
  • Capacity 200 mm X 150 mm (8" X 6"), ideal for cutting thin solid wood edgebanding or similar from a solid block of various types of lumber, thin cutting multiple rip saw that uses jig saw type technology, jig saw type blades are located in a jig at a distance from each other equal to the thickness of the cut required, the blades move up and down in tandem as the material is fed through the machine and the blades by a powered feed drive and a set of side and top hold down rollers, minimum working width 20 mm.
  • Minimum working height 40 mm, distance apart of blades 1.25 - 1.65 mm, individual saw blade size 550 X 40 X 1.65 mm, main motor rotation speed 1400 RPM, variable feed speed drive 1.5 kW, 15 kW main motor power, working pneumatic pressure 0.9 MPA, solid steel welded frame with hardened chrome work table, central dust extraction with sound enclosure, oil mist cooling system to cool down the saw blades, approximately 405 strokes/min...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ARSM5012] - GANG RIP SAW 12" WIDTH 50 HP MOTOR  Inventory #20560
MLS MACHINE DATA
  • Capacity 12" Width.
  • 50 HP - 4,000 RPM motor.
  • 70 mm diameter sleeve for max. 14" diameter saw blades.
  • 4-3/4" max. depth of cut.
  • 8-3/4" throat depth.
  • 10" min. stock length.
  • 3 HP Feed drive.
  • 0.5 HP head elevation motor.
  • 0 - 120 FPM feed speed via direct drive with gear reducer.
  • Automatic chain lubrication.
  • 60" x 30" Table; (2) upper infeed & (2) upper outfeed rollers at 4" in diameter .
  • Top & bottom anti-kickback fingers.
  • Main "twin" dust hood with 8" diameter outlets.
  • Long adjustable infeed fence.
  • (1) Saw sleeve with spacers.
  • Maintenance tool kit and operators manual...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ARSSL15] - 15 HP STRAIGHT LINE RIP SAW WITH BOTTOM MOUNT BLADE  Inventory #20548
MLS MACHINE DATA
  • Capacity maximum working thickness 125 mm (5"), shortest work piece length 230 mm (9"), table size 2000 X 1020 mm (79" X 40"), working height 850 mm (34") feed motor 1.5 kW (2 HP).
  • ,3600 RPM main blade, feed speed 10 - 24 M/Min (33-78 F/Min), arbor size 50.8 mm (2"), saw blade diameter 305 - 455 mm (12"-18"), distance between saw & column 460 mm (18"), motor 15 HP direct drive, RPM 3,600, double row anti kick back fingers, six hold down rollers, tempered heat treated feed chain, automatic lubrication of feed chain.
  • Guide line laser...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ARSSLS10] - 10 HP STRAIGHT LINE RIP SAW WITH TOP MOUNTED SAW BLADE  Inventory #20625
MLS MACHINE DATA
  • Capacity saw arbor diameter 1".
  • Saw blade 9" - 12" (305 MM).
  • Saw arbor motor 10 HP, saw arbor speed 6500 RPM, width of chain 150 mm (6"), arbor height adjustable, variable feed speed 13.3 - 23.3 M/MIN.
  • (43' - 76' FT/MIN), feed motor .75 kW - 1 HP, number of hold down rollers 4, max. stock thickness 3.3", min. stock length under 2 pressure rolls 8", min. stock length under 3 pressure rolls 14".
  • Overall table size 37"W x 51"L, table height approx. 34", distance between saw & column 13", distance between saw & left edge of table approx. 20", dust extraction hood 100 mm - 4", centralized lubrication system.
  • Guide line laser...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AWBS251] - 2 HEAD 51" WIDE BELT SANDER  Inventory #20742
MLS MACHINE DATA
  • Capacity width 1300 X 120 mm (51" X 4 3/4"), 2 head - 1st head contact drum 30 kW (40 HP), 2nd head combination head 22 kW (30 HP), with roller type cleaning brush and independent dust extraction, belt size 87" X 52", sanding belt tracking by electronic photo sensor, variable feed speed 4 kW (5 HP).
  • 5.5-27.5 m/min. (18 - 90'/min.), equipped with hold down shoe.
  • Infeed and outfeed roller.
  • Heavy duty rubber conveyor belt with pneumatic belt tracking, powered raise and lower with 0.55 kW (3/4 HP) motor with fine adjustment for each head independently, easy removal of sand paper for quick set up, equipped with air blowers to clean the sanding belts and dust hoods, front mounted control panel with Amp meters and Voltmeter, electronic measuring device with LED readouts, independent controls for each head, working air pressure 0.5 MPa, dust extraction consumption approx. 9000 m3/h (5300 Cfm).
  • 1st head 9" diameter 2nd head 8" and 3rd brush 6".
  • Dust connection 5 x 5" diameter...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ACS18] - 18" CUT OFF SAW C/W 10' INFEED AND OUTFEED CONVEYOR WITH POP UP STOPS  Inventory #20789
MLS MACHINE DATA
  • Capacity 18" undercut chop saw, maximum working width 10-330 mm (.5"-13"), max. working height 10-100 mm (.5"-4"), the cutting size will be a combination of the two sizes.
  • The higher the cut.
  • The less the width.
  • The wider the cut the less height can be cut, saw blade diameter 455 mm (18") with 1" bore, 5.5 kW (7.5 HP) main motor.
  • 3600 RPM, air pressure required 0.6 MPA, foot pedal operated, blade guard over saw blade that moves up and down as the saw blade cuts the material, hand safety protection connected to saw blade cover from feeding side using plexiglass cover connected to a limit swith to shut down the machine, complete work area protection guard with viewing window over the entire cutting area, supplied with 3 Meter (10') infeed and 3 Meter (10') outfeed conveyors and 6 pop up stops, available in both left and right handed...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [APG] - PROFILE GRINDER  Inventory #20873
MLS MACHINE DATA
  • Capacity 1.5 HP motor.
  • Maximum grinding wheel diameter of 8 7/8".
  • Accommodates a variety of wheel composites, maximum tool width 250 mm (9 1/2") with maximum tool diameter of 12" (4" minimum), adjustable clearance angles are 10-30°s on radial (back) clearance and 0-20°s on axial, equipped with axial grinding system, supplied with removable grinding wheel dresser, pump motor 90 W, total power requirements 1.7 HP...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AVG10] - 10' VENEER GUILLOTINE  Inventory #20610
MLS MACHINE DATA
  • Capacity 3,100 mm (10') veneer guillotine, maximum cutting length 3,100 mm, 80 mm (3") stroke, maximum cutting thickness 50 mm (2"), minimum width of material that can be cut 25 mm (1"), total power 4 kW (5.6 HP).
  • Completly hydraulically operated, noise level 65 dB, heavy duty machine with a ball screw for the rear table pusher to give a precission cut, Siemens liquid crystal display for setting sizes to be cut with 8 programs that can be preset, front mounted control panel with 2 push buttons to set the guillotine knife in motion (must use 2 hands for safety reasons).
  • Pusher forward/reverse and safety stop, front mounted mechanical digital control for fine adjustment, chrome front tables, safety fence at rear of machine to protect against the blade, front mounted safety eye to stop the machine if there is anything in the way of the blade...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AVS] - VENEER ZIG ZAG STITCHER  Inventory #20735
MLS MACHINE DATA
  • Capacity veneer stitcher with adjustable Zig Zag, throat capacity 920 mm, max. thickness 0.4-2 mm, jointing speed 15m/min., main motor 0.18 kW.
  • Heater 0.3 kW.
  • Total power 0.5 kW, the hot melt thread is applied in a longitudinal zig zag pattern across the splice line with the veneer pulling the thread through the heater to activate the glue, foot pedal operation, operation manual and parts list included...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AWHTS] - TOP LOAD LOW NOISE WOOD GRINDER  Inventory #20605
MLS MACHINE DATA
">
  • Capacity top load, low noise wood grinder, available with both straight or tapered hopper, 800 x 700 mm opening, 20 HP main motor belt drive to cutter head, hydraulic ram pusher, approx. 100 RPM.
  • 200-400 kg/hr. depending on material and screen size, rotating knife grinder has replaceable knives that can be rotated 4 times when they are no longer sharp, automatic feed pressure on rotor, all controls and motors are CSA and UL approved.
  • Wood waste is dumped into the top of the hopper and the hydraulic ram pushes the material into the rotating knife grinder.
  • The output is dependant on the screen size which are available in various sizes, the larger the screen size the greater the production...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFESL] - COMPLETE SPRAY APPLICATION FINISHING LINE  Inventory #21189
MLS MACHINE DATA
  • Capacity.
  • This compact line consists of a panel cleaner.
  • Automatic spray tunnel.
  • Heat tunnel and 2 lamp UV dryer.
  • Dust Panel Cleaner #23130 - Capacity 1300 mmÛ maximum processing thickness 80 mm.
  • Brush roller is 1350 mm x 140 diameter.
  • Feed speed is 5 - 30m/min.
  • C/W three cleaning brushes and 2 blow cleaning fans.
  • Also includes 2 anti static sticks with adjustable controller. 1300 mm Heat Tunnel #21164 - Capacity 1300 mm wide by unlimited length.
  • IR Heat tunnel with 4 forced air blowers and 3 heaters total heater power 16 kW.
  • Max. thickness of board 125 mm.
  • Maximum adjustable feeding speed 15m/min.
  • Digitally adjustable temperature controls.
  • Tunnel is 4 m long. 1300 mm UV Dryer #21163 - Capacity 1300 mm wide by unlimited length.
  • 2 lamp UV dryer.
  • Max. thickness 125 mm.
  • Total power 30 kW.
  • Maximum feed speed adjustable to 22m/min.
  • Two 1100 mm lights that run perpendicular to the travel of the board can be adjusted up and down.
  • Tunnel is 4m.
  • Automatic Spray Tunnel #21162 - Capacity 1300 mm wide by unlimited length.
  • Max. thickness 125 mm.
  • Feeding speed is variable from 0.5m/min. - 15m/min.
  • Spray guns travel to a maximum of 80m/min.
  • 8 spray guns (not included) but can be quoted separately.
  • Air pressure 0.05 - 0.08 Mpa.
  • Machine automatically measures the size of the board and only spray's for the length and width of the board.
  • Also includes a belt cleaner with a recycling tray for re-using paint.
  • All electrical components are CSA/UL approved.
  • Optional Kremlin airless spray guns.
  • We appreciate that customers might have their preferences when selecting the actual spray guns...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEHT] - 1300 MM (51") IR (INFRA RED) HEAT DRYING TUNNEL  Inventory #21164
MLS MACHINE DATA
  • Capacity 1300 mm wide by unlimited length.
  • IR heat tunnel with 4 air circulating fans and 3 heaters total heater power 16 kW.
  • Max. thickness of board 125 mm.
  • Maximum adjustable feeding speed 15m/min.
  • Digitally adjustable temperature controls.
  • Tunnel is 4 m long...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSP626] - 62" TOP AND BOTTOM GLUE SPREADER WITH 6" OPENING AND VARIABLE SPEED  Inventory #21002
MLS MACHINE DATA
  • Capacity heavy duty 1,600 mm (62") 4 roll top and bottom glue spreader.
  • Mechanical digital indicator.
  • 2 rubber rollers and 2 stainless steel doctor rollers, 9.5" diameter rubber rollers, shafts are made from hardened stainless steel, 8" diameter doctor rollers, manual fine adjustment controls, infinitely variable speed drive, maximum material thickness 150 mm (6"), 2.2 kW (3 HP) direct drive motor, water wash cleaning system with central water pipe C/W shut off to connect to main water inlet, safety shut off cord along the full length of the machine, safety covers over the glue rollers...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEST] - 1300 MM (51") AUTOMATIC RECIPROCATING SPRAY TUNNEL  Inventory #21162
MLS MACHINE DATA
">
  • Capacity 1300 mm wide by unlimited length.
  • Max. thickness 125 mm.
  • Feeding speed is variable from 0.5m/min. - 15m/min.
  • Spray guns travel to a maximum of 80m/min.
  • 8 spray guns (not included) but can be quoted separately.
  • Air pressure 0.05 - 0.08 Mpa.
  • Machine automatically measures the size of the board and only spray's for the length and width of the board.
  • Also includes a belt cleaner with a recycling tray for re-using paint.
  • All electrical components are CSA and UL approved.
  • Optional Kremlin airless spray guns,as we recognize that customers might have their preference when it comes to selecting spray guns...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEPC] - 1300 MM (51") 3 ROLL PANEL CLEANER  Inventory #21165
MLS MACHINE DATA
  • Capacity 1300 mm maximum processing thickness 80 mm.
  • Brush roller is 1350 mm x 140 mm diameter.
  • Feed speed 5 - 30m/min.
  • C/W three cleaning brushes and 2 blow cleaning fans.
  • Also includes 2 anti static rods with adjustable controller...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFERRC] - 1300 MM (51") DOUBLE ROLL REVERSE ROLLER COATER  Inventory #21167
MLS MACHINE DATA
  • Capacity 1300 mm wide by 150 mm thickness.
  • Feed speed variable from 5 - 30m/min.
  • Paint roller is 245 mm diameter x 1450 long and reverse wheel is 130 mm diameter by 1450 long.
  • Paint roller is made of a durable rubber and reverse roll is chrome.
  • Speeds of both rollers and belt can be adjusted.
  • All adjustments have mechanical digital indicators...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEUV51] - 1300 MM (51") 2 LAMP UV DRYER  Inventory #21163
MLS MACHINE DATA
  • Capacity 1300 mm wide by unlimited length.
  • 2 lamp UV dryer.
  • Max. thickness 125 mm.
  • Total power 22 kW.
  • Maximum feed speed adjustable to 22m/min.
  • Two 1300 mm lights that run 30°s on edge and can be adjusted up and down...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEHTS] - 1300 MM (51") IR HEAT TUNNEL WITH AUXILLIARY AIR HEATER  Inventory #21166
MLS MACHINE DATA
  • Capacity 1300 mm IR (Infra Red) heat tunnel with auxiliary air heater and re-circulating air system with forced air blowers.
  • Max. thickness 125 mm and variable speed up to 15m/min.
  • Total power 16 kW.
  • Tunnel length is 6m...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [APTB24HD] - 24" DOUBLE SURFACE HEAVY DUTY PLANER  Inventory #20546
MLS MACHINE DATA
  • Capacity maximum width of planer 610 mm (24").
  • Max. thickness capacity 170 mm (7").
  • Min. length capacity 310 mm (12").
  • Cutter head diameter 125 mm (5").
  • Cutterhead speed 6000 RPM.
  • Feed speed 7 - 16 m/min.
  • Number of table rollers 5.
  • Table surface 27" X 103".
  • Top cutter head motor 25 HP.
  • Bottom cutter head motor 20 HP.
  • Feed motor 5 HP.
  • Table elevation motor 1.5 HP.
  • Elevating screw diameter (4) 1 1/4".
  • Machine dimensions L X W X H 2667 X 1145 X 1720 mm.
  • Spring loaded heat treated pressure fingers.
  • 52 section conveyor for feeding wood pieces to produce flat surface and desired thickness for edge gluing.
  • Chrome hardened tables.
  • Powered and idle bottom rollers.
  • Central lubrication for column screws and slide ways.
  • Digital thickness setting.
  • Auto thickness device.
  • Spiral cutter head 125 mm with replaceable carbide knives.
  • With self locking screws.
  • CSA electrical components.
  • 600 Volt // 3 Phase // 60 Hz electrics.
  • Rubber out feed roll.
  • Includes pneumatic driver for changing carbide knives in cutter head.
  • Solid cast construction and chrome hardened table...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AHP5121] - 5' X 12' SINGLE OPENING HOT PRESS C/W SOLID STEEL DRILLED PLATENS  Inventory #21486
MLS MACHINE DATA
  • Capacity single opening 1,600 mm X 3,700 mm (5' X 12') side loading hot press, steel drilled platens, 10 HP hydraulic pump, oil heated C/W a 45 kW boiler and 2.2 kW pump to 120°s centigrade, 8 cylinders each one being 100 mm in diameter X 300 mm stroke, 160 ton pressure, 300 mm daylight, CSA certified electrical components, control panel on right hand column of machine, panel includes powered open and close.
  • Thermostat.
  • Timer and pressure gauge, safety cable around the complete perimeter of the machine...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ALVS] - LONGITUDINAL VENEER SPLICER  Inventory #21535
MLS MACHINE DATA
">
  • Capacity minimum veneer strip length 300 mm / 11.8" - unlimited length.
  • Thickness of veneer in some cases depending on kind of veneer 0.3 - 3.0 mm / 0.012 - 0.12".
  • Veneer strip width 45 - 1200 mm / 1.77 - 47.25".
  • Moisture content 8 - 15%.
  • Throughput speed 10 - 35 m/min. / 33' - 115'/min.
  • Length of heating zone 1000 mm / 39-1/3".
  • Heating zone uses approximately 3 kW of power.
  • Heating temperature 100 to a maximum of 250°s C / 482°s F.
  • UREA or PVAC based glue.
  • Working height approximately 36".
  • Average energy consumption 3 kW.
  • Also requires air hook up...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AEB2S] - 3 MM PVC AUTOMATIC EDGEBANDER END TRIM, FINE TRIM  Inventory #20787
MLS MACHINE DATA
  • Capacity thickness of edgebanding 0.5-3 mm.
  • Working thickness 11-40 mm, minimum width 90 mm.
  • Working length 280 mm.
  • 1st aggregate guillotine end trim.
  • 2nd aggregate top and bottom trim.
  • 2nd aggregate 370w.
  • Glue pot 1250w.
  • Glue pot maximum temperature 200° c.
  • Track motor 370w.
  • Edgeband drive motor 25w.
  • Glue pot drive motor 40w.
  • Configuration hot melt, end trim, fine trim.
  • Glue type hot melt...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEMS] - 205 MM MOULDING SPRAY SYSTEM  Inventory #21966
MLS MACHINE DATA
  • Capacity processing width 10-205 mm.
  • Processing thickness 10-205 mm.
  • Min. length 450 mm.
  • Feeding speed 0-50 m/min.
  • Working spraying guns max. 6.
  • Working pressure 0.5-0.8 Mpa.
  • Total power 2.25 kW.
  • The automatic profile spraying machine is a special machine for spraying mouldings or narrow long pieces on all sides.
  • Suitable for UV, PU, PE, NV.
  • Equipped with a UV lacquer reclaiming device to reduce waste.
  • The spraying machine can be used alone or it can be supplied with an inline drier in order for the pieces to be fully dried after spraying.
  • The machine is equipped with a PVC infeed and outfeed conveyor.
  • Under the spray guns are 2 removable drip trays for re-claiming excess paint.
  • The machine does not include the spray guns however it is recommended to use 6 guns...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AWBS239] - 2 HEAD 39" WIDE BELT SANDER  Inventory #21761
MLS MACHINE DATA
  • Capacity width 1000 x thickness 120 mm (39" x 4 3/4"), 2 head - 1st head contact drum 22 kW (29 HP).
  • diameter 215 mm.
  • 2nd head combination head 18.5 kW (25 HP).
  • diameter 170 mm.
  • With roller type cleaning brush and independent dust extraction.
  • Brush motor: 0.37 kW (0.5 HP).
  • Belt size 1030 x 2000 mm (41" x 87").
  • Sanding belt tracking by electronic photo sensor.
  • Variable feed speed 3 kW (4 HP).
  • 5-20 m/min. (16 1/4-65'/min.).
  • Pressure roller.
  • Infeed and outfeed roller.
  • Heavy duty rubber conveyor belt with pneumatic belt tracking.
  • Powered raise and lower with 0.55 kW (3/4 HP) motor with fine adjustment for first drum and pad.
  • Easy removal of sand paper for quick set up.
  • Equipped with air blowers to clean the sanding belts.
  • Front mounted control panel with Amp meters and Voltmeter,independent controls for each head.
  • Electronic measuring device with led readouts (tbd) working air pressure 0.5mpa.
  • Dust extraction consumption approx. 5000 m3/h...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AST16] - 5' SLIDING TABLE SAW WITH 3/4" DADO CAPABILITY  Inventory #23083
MLS MACHINE DATA
  • Capacity maximum length 1600 mm.
  • Maximum thickness at 90°s 70 mm.
  • Maximum thickness at 45°s 50 mm.
  • Main blade diameter 305 mm, main blade bore 30 mm, main blade 3.0 kW.
  • Scoring blade diameter 120 mm, scoring blade bore 20 mm, scoring blade 1.1 kW.
  • Method for raise & lower blade - manual.
  • Method for changing angle of blade - manual.
  • Speed 4500/5000/6500...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AEB3S] - 3 MM PVC AUTOMATIC EDGEBANDER END TRIM, FINE TRIM AND BUFFING  Inventory #23062
MLS MACHINE DATA
  • Capacity thickness of edgebanding 0.5-3 mm.
  • Working thickness 11-40 mm.
  • Minimum width 90 mm.
  • Working length 280 mm.
  • 1st unit guillotine end trim.
  • 2nd unit top and bottom trim 370w.
  • 3rd unit buffing 90w.
  • Glue pot 1250w.
  • Glue pot maximum temperature 200° c.
  • Track motor 370w.
  • Edgeband drive motor 25w.
  • Glue pot drive motor 40w.
  • Configuration hot melt.
  • End trim.
  • Fine trim and buffing.
  • Glue type hot melt...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSP6212] - 62" TOP AND BOTTOM GLUE SPREADER WITH 12" OPENING C/W VARIABLE SPEED  Inventory #23135
MLS MACHINE DATA
  • Capacity heavy duty 1,600 mm (62") 4 roll top and bottom glue spreader.
  • Mechanical digital indicator.
  • 2 rubber rollers and 2 stainless steel doctor rollers, 9.5" diameter rubber rollers, shafts are made from hardened stainless steel, 8" diameter doctor rollers.
  • Manual fine adjustment controls.
  • Infinitely variable speed drive.
  • Maximum material thickness 300 mm (12").
  • 2.2 kW (3 HP) direct drive motor.
  • Water wash cleaning system with central water pipe C/W shut off to connect to main water inlet.
  • Safety shut off cord along the full length of the machine.
  • Safety covers over the "NOR" rubber glue rollers...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSP726] - 72" TOP AND BOTTOM GLUE SPREADER C/W VARIABLE SPEED  Inventory #23137
MLS MACHINE DATA
  • Capacity heavy duty 1,850 mm (72") 4 roll top and bottom glue spreader.
  • Mechanical digital indicator.
  • 2 rubber rollers and 2 stainless steel doctor rollers, 9.5" diameter rubber rollers, shafts are made from hardened stainless steel, 8" diameter doctor rollers, manual fine adjustment controls, infinitely variable speed drive, maximum material thickness 150 mm (6"), 2.2 kW (3 HP) direct drive motor, water wash cleaning system with central water pipe C/W shut off to connect to main water inlet, safety shut off cord along the full length of the machine, safety covers over the glue rollers...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AMRE] - OSCILLATION ROUND END MORTISER  Inventory #22276
MLS MACHINE DATA
  • Capacity maximum width of mortise 120 mm.
  • Maximum depth of mortise 50 mm.
  • Oscillation approx 400 stroke/min.
  • Vertical adjustment 3".
  • Cutter speed 9500 RPM.
  • Spindle motor 2 HP.
  • Oscillation motor 1/2 HP 2 stations.
  • Air holddown clamps.
  • Prices quoted in US dollars are FOB our warehouse Charlotte, North Carolina, Prices quoted in Canadian dollars are FOB our warehouse Richmond Hill, Ontario.
  • As we are constantly striving to improve our products we reserve the right to change or modify the specifications without prior notice...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ACNC510HP] - 5' X 10' SINGLE HEAD CNC ROUTER  Inventory #22803
MLS MACHINE DATA
  • ACTIVA HP series moving gantry CNC machines are made in North America and are made from heavy gauge tubing and fabricated steel.
  • The HP series family is a perfect solution for woodworking, sign making, plastic cutting and non ferrous metal processing applications.
  • HP series are full 3 axes CNC and are able to do surface carving.
  • Machines are designed and built with high quality Japanese and European components and reasonably priced to be affordable for small to medium production operations.
  • Heavy duty variable speed spindle motors ensures that the machine can perform for the most intricate tasks required.
  • Power of the motors come standard with 5.5 HP ER 25 spindle with optional 10 HP ISO 30 HSD spindle with 6 tool changer all with speeds up to 18000 RPM `State of the art native G code control system with user friendly HMI (Human Machine Interface) eliminates the need for professional operators. `The operator can edit and incorporate new designs right on the machine which saves time. (G-Code programming knowledge required) Capacity work area (X,,Y,,Z) 121" x 61" x 8" (3050 mm 1550 mm x 203 mm).
  • Transmission system by rack and pinion on x and Y axis.
  • Z axis has ball screw.
  • Heavy duty frames made from minimum 1/4" (6 mm)wall.
  • Stress relieved and machined to ñ0.01 mm of accuracy.
  • Precision straight tooth rack and pinion. (Japan) Dust proofed IP55 electrical cabinet (Canada) CE.
  • UL.
  • CSA approved components and electrical system High flex shielded cables ( Guaranteed for 40,000,000 cycles) (Italy) 6 kW VFD (Spindle drive)( Japan.
  • U.S.A) High power micro stepper motors and drives. 64,000 pulses/rev. (U.S.A.) 3 axis interpolation G code-based pc controller Standard Pc and monitor. (Various) Feed speeds Rapid x= 1300 IPM y=1300 IPM z=800 IPM Wood cutting x=1300 y=1300 z=800 Frame of machine is air sealed and used as a vacuum tank for increased efficiency of vacuum system.
  • MDF vacuum table.
  • Remote diagnosis Ethernet.
  • Control system PC based.
  • Machine repeatability 0.02 mm , Air requirement 6-7 bar.
  • Voltage 220 Volt, 3 Phase.
  • The machines are reasonably equipped and can be ordered with the following options at additional cost : 10 HP ISO 30 with 6 tool changer Independent L shaped drilling unit (9V.
  • 3 x 2 Hor.
  • 1 Saw) Precision Digital Servo Motors Busch Vacuum Pump Pop-up stops Teach Pendant CAD/CAM Software Additional stations for tool changer Mister for cutting non ferrous metal, High capacity dust collection system...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AST32M] - 10' SLIDING TABLE SAW MANUAL  Inventory #23082
MLS MACHINE DATA
  • Capacity maximum thickness at 90°s 70.
  • Maximum thickness at 45°so 50, main blade diameter 305 mm.
  • Main blade bore 30 mm.
  • Main blade 4 kW.
  • Scoring blade diameter 120 mm.
  • Scoring blade bore 20 mm.
  • Scoring blade 1.1 kW.
  • Method for raise & lower blade manual.
  • Method for changing angle of blade manual.
  • Speed 4500/5000/6500.
  • Maximum length 3200 mm...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AEB4] - 3 MM PVC AUTOMATIC EDGEBANDER END TRIM, FINE TRIM, SCRAPING AND BUFFING  Inventory #23063
MLS MACHINE DATA
  • Capacity thickness of edgebanding 0.5-3 mm.
  • Working thickness 11-40 mm.
  • Minimum width 90 mm.
  • Working length 280 mm.
  • 1st unit guillotine end trim.
  • 2nd unit top and bottom trim 370w.
  • 3rd unit scraping.
  • 4th unit buffing 90w.
  • Glue pot 1250w.
  • Glue pot maximum temperature 200° c.
  • Track motor 370w.
  • Edgeband drive motor 25w.
  • Glue pot drive motor 40w.
  • Configuration hot melt.
  • End trim.
  • Fine trim and buffing.
  • Glue type hot melt...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSP12] - 12" TOP AND BOTTOM GLUE SPREADER C/W VARIABLE SPEED  Inventory #23138
MLS MACHINE DATA
  • Capacity 300 mm (12").
  • Mechanical digital indicator.
  • 4 roll top and bottom glue spreader, 2 rubber rollers and 2 stainless steel doctor rollers, 7.5" diameter rubber rollers, shafts are made from hardened stainless steel, 6" diameter doctor rollers, manual fine adjustment controls, infinitely variable speed drive, maximum material thickness 80 mm (3.1"), 2.2 kW (3 HP) main drive motor, water wash cleaning system with single water connection and shut off to connect to main water inlet, safety shut off cord along the full length of the machine, safety covers over the glue rollers...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSP62S] - 62" TOP GLUE SPREADER C/W VARIABLE SPEED  Inventory #22814
MLS MACHINE DATA
  • Capacity 1,600 mm (62") 2 roll top glue spreader.
  • Mechanical digital indicator.
  • 1 rubber rollers and 1 stainless steel doctor rollers, 7.5" diameter rubber rollers, shafts are made from hardened stainless steel, 6" diameter doctor rollers, manual fine adjustment controls, infinitely variable speed drive, maximum material thickness 80 mm (3.1"), 2.2 kW (3 HP) main drive motor, water wash cleaning system with single water connection and shut off to connect to main water inlet, safety shut off cord along the full length of the machine, safety covers over the glue rollers...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AHP493] - 4' X 9' HOT PRESS C/W SOLID STEEL DRILLED PLATENS  Inventory #21693
MLS MACHINE DATA
  • Capacity 2,743 mm X 1,219 mm (4' X 9') side loading hot press, steel drilled platens, oil heated C/W 54 kW boiler and 2.2 kW pump to 120°s centigrade, 10 cylinders each one being 85 mm diameter X 300 mm stroke, 160 ton pressure.
  • CSA, UL and CE certified electrical components, control panel on right hand column of machine, panel includes powered open and close.
  • Thermostat.
  • Timer and pressure gauge, safety cable around the complete perimeter of the machine.
  • Optional extra of US$3,500 each for up to 2 intermediate platen available to make this up to a 3 opening press with 100 mm daylight...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AEB5] - 3 MM PVC AUTOMATIC EDGEBANDER END TRIM, ROUGH TRIM, FINE TRIM, SCRAPING AND BUFFING  Inventory #23150
MLS MACHINE DATA
  • Capacity thickness of edgebanding 0.5-3 mm.
  • Working thickness 11-40 mm.
  • Minimum width 90 mm.
  • Working length 280 mm.
  • 1st unit guillotine end trim.
  • 2nd unit top and bottom rough trim 0.5 HP at 12000 RPM.
  • 3rd unit top and bottom fine trim 370w.
  • 4th scraping.
  • 5th unit buffing 90w.
  • Glue pot 1250w.
  • Glue pot maximum temperature 200° c.
  • Track motor 370w.
  • Edgeband drive motor 25w.
  • Glue pot drive motor 40w.
  • Configuration hot melt, end trim, rough trim, fine trim, scraping and buffing.
  • Glue type hot melt...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ATP24] - 24" THICKNESS PLANER  Inventory #22879
MLS MACHINE DATA
  • Capacity maximum working width 630 mm (24").
  • Working thickness 3-270 mm (0.125-10.5").
  • Maximum planing 5 mm (.1875").
  • Min. working length 230 (9").
  • Cutter (knife size 630x30x3 mm) head diameter 120 mm (4.7").
  • Cutter head RPM 6200.
  • Main motor 7.5 kW (10 HP).
  • Feed speed 5/8/12/m/min.
  • Includes digital display for height adjustment as well as sectional feed...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AEB3] - 3 MM PVC AUTOMATIC EDGEBANDER END TRIM, FINE TRIM, AND BUFFING  Inventory #23148
MLS MACHINE DATA
  • Capacity thickness of edgebanding 0.5-3 mm.
  • Working thickness 11-40 mm.
  • Minimum width 90 mm.
  • Working length 280 mm.
  • 1st unit front and rear end trim saws.
  • 2nd unit top and bottom trimmers with (2) 1.1 kW 12000 RPM motors.
  • 3rd unit buffing with (2) 0.37 kW motors.
  • Glue pot.
  • Glue pot maximum temperature 200° c.
  • Feed motor 2 HP (1.5 kW).
  • Track Configuration hot melt.
  • End trim.
  • Fine trim and buffing.
  • Glue type hot melt...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEMSW] - MOULDING 300MM SPRAY SYSTEM  Inventory #23198
MLS MACHINE DATA
  • Capacity processing width 10-300 mm.
  • Processing thickness 10-205 mm.
  • Min. length 200 mm.
  • Feeding speed 0-50 m/min.
  • Working spraying guns max. 6.
  • Working pressure 0.5-0.8 Mpa.
  • Total power 2.25 kW.
  • The automatic profile spraying machine is a special machine for spraying mouldings or narrow long and short pieces on all sides.
  • Suitable for UV, PU, PE, NV.
  • Equipped with a UV lacquer reclaiming device to reduce waste.
  • The spraying machine can be used alone or it can be supplied with an inline drier in order for the pieces to be fully dried after spraying.
  • The machine is equipped with a PVC infeed and outfeed conveyor.
  • Under the spray guns are 2 removable drip trays for re-claiming excess paint.
  • The machine does not include the spray guns however it is recommended to use 6 guns...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSP51S] - 51" TOP GLUE SPREADER C/W VARIABLE SPREED  Inventory #23125
MLS MACHINE DATA
  • Capacity 1,300 mm (51") 2 roll top glue spreader.
  • Mechnanical digital indicator.
  • 1 rubber rollers and 1 stainless steel doctor rollers.
  • 7.5" diameter rubber rollers, shafts are made from hardened stainless steel.
  • 6" diameter doctor rollers.
  • Manual fine adjustment controls.
  • Infinitely variable speed drive.
  • Maximum material thickness 80 mm (3.1").
  • 2.2 kW (3 HP) main drive motor.
  • Water wash cleaning system with single water connection and shut off to connect to main water inlet.
  • Safety shut off cord along the full length of the machine.
  • Safety covers over the glue rollers...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AL51] - 51" SINGLE SIDED LAMINATOR  Inventory #23128
MLS MACHINE DATA
  • Capacity 51" Laminator for PVC and paper has built in glue spreader and 2 heated pressure rollers with feeder for PVC rolls, standard white glue.
  • Includes infeed and outfeed conveyors 6'(2m) long each.
  • Minimum length of panels 24"(600 mm).
  • Panel width 24-49" (600-1220 mm).
  • Panel thickness 0.1" - 1.125"(2-30 mm).
  • Max. width of paper 49"(1220 mm).
  • Max. roll thickness 12" (300 mm).
  • Main drive power 2 HP (1.5 kW).
  • Feed speed 17'/min. (5.3m/min.).
  • Maximum pressure roller temperature 90 C.
  • Pressure roller heated by oil.
  • Hot oil heater power 4 kW.
  • Glue applicator roll diameter 190 mm.
  • Chrome doctor roller diameter 155 mm.
  • Heated pressure roller diameter 190 mm.
  • Specifications subject to change without notice...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AL62] - 62" SINGLE SIDED LAMINATOR  Inventory #23129
MLS MACHINE DATA
  • Capacity 62" Laminator for PVC and paper has built in glue spreader and 2 heated pressure rollers with feeder for PVC rolls.
  • Standard white glue.
  • Includes infeed and outfeed conveyors 6'(2m) long each.
  • Minimum length of panels 24"(600 mm).
  • Panel width 24-49" (600-1220 mm).
  • Panel thickness 0.1" - 1.125"(2-30 mm).
  • Max. width of paper 49"(1220 mm).
  • Max. roll thickness 12" (300 mm).
  • Main drive power 2 HP(1.5 kW).
  • Feed speed 17'/min. (5.3m/min.).
  • Maximum pressure roller temperature 90 C.
  • Pressure roller heated by oil.
  • Hot oil heater power 4 kW.
  • Glue applicator roll diameter 190 mm.
  • Chrome doctor roller diameter 155 mm.
  • Heated pressure roller diameter 190 mm.
  • Specifications subject to change without notice...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEPC51S] - 51" PANEL CLEANER  Inventory #23130
MLS MACHINE DATA
  • Capacity 51" (1300 mm) Panel Cleaner.
  • Top 6" brush wheel.
  • 2 - 4" dust collector ports for effective dust removal.
  • Fully enclosed machine.
  • 5 drive wheels are 6" in diameter.
  • 1.5 kW drive motor.
  • Includes 24" infeed and outfeed conveyor.
  • Optional customized infeed and outfeed conveyor available on request.
  • Optional variable speed...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEPC62S] - 62" PANEL CLEANER  Inventory #23131
MLS MACHINE DATA
  • Capacity 62" (1600 mm) Panel Cleaner.
  • Top 6" brush wheel.
  • 2 - 4" dust collector ports for effective dust removal.
  • Fully enclosed machine.
  • 5 drive wheels are 6" in diameter.
  • 1.5 kW drive motor.
  • Includes 24" infeed and outfeed conveyor.
  • Optional customized infeed and outfeed conveyor available on request.
  • Optional variable speed...
View Specifications >
Learn about Machines of Interest to Me >
FOX [C 4 EXTENDED] - SEMI AUTOMATIC PALLET WRAPPER FOR 5' X 10'  Inventory #23473
MLS MACHINE DATA
  • Capacity control features flush mounted control panel built into tower.
  • Lcd display screen providing detailed function control viewing.
  • With detailed operations printed on panel face for easy operator reference.
  • Plc with back lit lcd screen and e-prom memory.
  • Large emergency push button power on / off switch with indicator light.
  • Start cycle push button.
  • Standard wrap up / down program.
  • Separate top and bottom wrap selectors (1-10).
  • Separate film height over load selector (1"-10").
  • Variable turntable rotation speed control (0-14 rpm).
  • Variable speed carriage up / down control.
  • Reinforce wrap function (2 wraps).
  • Cycle counter (keeps track of each load wrapped).
  • Manual carriage raise and lower push buttons.
  • Turntable jog control with auto alignment feature.
  • 24 Volt control systems (for operator safety).
  • Circuit breakers on the panel face for main power and dc drive boards structural fork lift portable front or rear large formed steel tower base plate 5/16" thick steel rigid unibody base frame construction technical information all switches, relays, scr controls are available locally throughout north america.
  • Power requirements: 115 vac @ 15 Amp.
  • 60 Hz complete manual with electrical schematic provided with machine.
  • Film delivery fox "linear" 20 inch powered pre-stretch film delivery system.
  • Easy thread film carriage.
  • No hinges, latches or idler rollers to wear and cause.
  • Inconsistent film stretching.
  • Electronic film force control on panel.
  • Adjustable mechanical force to load.
  • Linear analog proximity sensor film feed speed control.
  • 1/2 HP dc scr variable speed film drive.
  • Pre-stretch 50-300% upon request (200% standard settings).
  • Triple beam auto height eye capable of recognizing all.
  • Colors including black.
  • Carriage lift v groove wheel supports providing effortless movement and maximum stability (qty4).
  • Heavy duty ansi #50 chain carriage lift.
  • 1/2 HP dc scr variable speed drive.
  • Turntable drive positive home alignment.
  • 0 -14 RPM turntable speed.
  • 1/2 HP scr variable speed drive.
  • Adjustable electronic soft start / stop.
  • Options ramp (fox c3).
  • Heavy duty ramp for electric.
  • Powered hand truck (fox c3).
  • Ramp extension (fox c3).
  • Tower height extension (fox c3-c4).
  • Base extension (fox c3-c4).
  • Roping bar (fox c4).
  • Scale package (fox c3-c4).
  • Automatic end of cycle film.
  • Cut off (fox c3-c4).
  • Dual turntable (fox c3-c4).
  • Top platen (fox c3-c4).
  • FOX C4 (High Profile) rigid base frame construction.
  • 48" octagon steel turntable plate.
  • No face lubrication required.
  • Lubrication points on caster roller bearings and swivel.
  • 4 support swivel casters under table.
  • Heavy duty #50 chain and sprocket drive system.
  • 10 7/8" from floor to top of turntable.
  • Standard base with 2 extension to accommodate up to 10 feet long panel...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLS48HML] - 48" SINGLE SIDED HOT MELT GLUE SPREADER LINE WITH THROUGH FEED PINCH ROLLER PRESS  Inventory #23577
MLS MACHINE DATA
  • Capacity 48" (1220 mm) wide single sided hot melt glue spreader line with manual assembly conveyor and inline pressure rollers ideally for honeycomb panels - capable of completeing one side in 60 seconds.
  • Includes infeed conveyor to glue spreader.
  • Layup table with automatic stop to place to cover on glue part.
  • 6 section pressure roller thru feed press.
  • Outfeed conveyor.
  • Infeed conveyor with 10 rollers with a diameter of 3" (80 mm) and motivity power of 2 HP (1.5 kW).
  • Heated application roller with a maximum temperature of 400F (200C) and diameter of 9.5"(240 mm).
  • Doctor roller diameter 7.5" (190 mm).
  • Bottom rubber drive roller 9.5" (240 mm).
  • Heated application roller heated by thermic oil with a 18 kW heater and a 2 HP (1.5 kW) circulation pump.
  • Main drive 3 HP (2.2 kW).
  • 3 roller 3" (80 mm) diameter infeed conveyors and 2 roller 3" (80 mm) outfeed conveyor each powered by a 2 HP (1.5 kW) motor and gearbox.
  • Variable speed from 6 - 80'/min. (2-25m/min.).
  • Recommended PUR glue for honeycomb applications.
  • 13 roller 3" (80 mm) diameter layup table with automatic stop for manually laying the covering material.
  • Layup table with 2 HP (1.5 kW) motor power.
  • 6 roller 9" (240 mm) pressure roller thru feed press.
  • Pneumatic and spring loaded top pressure, electric rise and fall.
  • 4 HP(3 kW) motivity power.
  • 13 roller 3"(80 mm) diameter outfeed conveyor.
  • Entire line capable of handling thicknesses of .0625"- 2" (2-50 mm).
  • Minimum part length 24"(600 mm).
  • Infeed, glue spreader, layup table.
  • Pressure rollers and outfeed table all have independant variable speed control, all specifications are subject to change without...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGSLD51] - 51" LIGHT DUTY DOUBLE SIDED GLUE SPREADER  Inventory #22777
MLS MACHINE DATA
  • Capacity 1,300 mm (51") 4 roll top and bottom glue spreader.
  • Mechanical digital indicator.
  • 2 rubber rollers and 2 stainless steel doctor rollers, 7.5" diameter rubber rollers, shafts are made from hardened stainless steel, 6" diameter doctor rollers, manual fine adjustment controls, maximum material thickness 80 mm (3.1"), 2.2 kW (3 HP) main drive motor.
  • As we are constantly striving to improve our products we reserve the right to change or modify the specifications without prior notice...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGSLD62] - 62" DOUBLE SIDED LIGHT DUTY GLUE SPREADER  Inventory #22776
MLS MACHINE DATA
  • Capacity 1600 mm (62") 4 roll top and bottom glue spreader.
  • Mechanical digital indicator.
  • 2 rubber rollers and 2 stainless steel doctor rollers, 7.5" diameter rubber rollers, shafts are made from hardened stainless steel, 6" diameter doctor rollers, manual fine adjustment controls, maximum material thickness 80 mm (3.1"), 2.2 kW (3 HP) main drive motor.
  • As we are constantly striving to improve our products we reserve the right to change or modify the specifications without prior notice...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AEB6] - 3 MM PVC AUTOMATIC EDGEBANDER PRE-MILLING, END TRIM, ROUGH TRIM, FINE TRIM, SCRAPING AND BUFFING  Inventory #23614
MLS MACHINE DATA
  • Capacity thickness of edgebanding 0.5-3 mm.
  • Working thickness 11-40 mm.
  • Minimum width 90 mm.
  • Working length 280 mm.
  • 2 pre-milling heads.
  • Guillotine end trim.
  • Top and bottom rough trim 0.5 HP at 12000 RPM.
  • Top and bottom fine trim 370w.
  • Scraping.
  • Buffing 90w.
  • Glue pot 1250w.
  • Glue pot maximum temperature 200° c.
  • Track motor 370w.
  • Edgeband drive motor 25w.
  • Glue pot drive motor 40w.
  • Configuration pre-milling, hot melt, end trim, rough trim, fine trim, scraping and buffing.
  • Glue type hot melt.Optional extra all Italian high speed motors extra US$5,000...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AVG8] - 8' VENEER GUILLOTINE  Inventory #23609
MLS MACHINE DATA
  • Capacity 2,600 mm (8') veneer guillotine, maximum cutting length 2,600 mm, 80 mm (3") stroke, maximum cutting thickness 50 mm (2"), minimum width of material that can be cut 25 mm (1"), total power 4 kW (5.6 HP).
  • Completly hydraulically operated, noise level 65 dB, heavy duty machine with a ball screw for the rear table pusher to give a precission cut, Siemens liquid crystal display for setting sizes to be cut with 8 programs that can be preset, front mounted control panel with 2 push buttons to set the guillotine knife in motion (must use 2 hands for safety reasons).
  • Pusher forward/reverse and safety stop, front mounted mechanical digital control for fine adjustment, chrome front tables, safety fence at rear of machine to protect against the blade, front mounted safety eye to stop the machine if there is anything in the way of the blade...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ADCS] - SINGLE SPINDLE DOVETAILER FOR CURVED OR STRAIGHT  Inventory #22938
MLS MACHINE DATA
  • Capacity board type curved or flat.
  • Tenon thickness min.77 mm, max.20 mm.
  • Tenon width min.6 mm, max.18 mm.
  • Tenon depth min.10 mm, max.30 mm.
  • Spindle vertical adjustment 30 mm.
  • Clamping device tilting.
  • Maximum workpiece sizes length 1500 mm, width 480 mm.
  • Collect chuck capacity 12 mm.
  • (4) air holddowns.
  • Spindle speed 21,500 RPM.
  • Spindle motor 2 HP.
  • Dust hood outlet diameter 60 mm.
  • Allows you to dovetail bore & groove all in one step.
  • Can work with both straightened curved fronts...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGL24HM] - 24" SINGLE SIDED HOT MELT GLUE SPREADER  Inventory #23452
MLS MACHINE DATA
  • Capacity 24" (600 mm) wide single sided hot melt glue spreader.
  • Heated application roller with a maximum temperature of 300F (150C) and diameter of 9.5"(240 mm).
  • Doctor roller diameter 7.5" (190 mm).
  • Bottom rubber drive roller 9.5" (240 mm).
  • Heated application roller heated by thermic oil with a 18 kW heater and a 2 HP (1.5 kW) circulation pump.
  • Main drive 3 HP (2.2 kW).
  • 3 roller 3"(80 mm) diameter infeed conveyors and 2 roller 3" (80 mm) outfeed conveyor each powered by a 2 HP (1.5 kW) motor and gearbox.
  • Variable speed from 3 - 80'/min. (1-25m/min.).
  • All specifications are subject to change without...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSP516] - 51" DOUBLE SIDED HEAVY DUTY GLUE SPREADER WITH 6" OPENING  Inventory #22775
MLS MACHINE DATA
  • Capacity heavy duty 1,300 mm (51") 4 roll top and bottom glue spreader.
  • Mechanical digital indicator.
  • 2 rubber rollers and 2 stainless steel doctor rollers, 9.5" diameter rubber rollers, shafts are made from hardened stainless steel, 8" diameter doctor rollers.
  • Manual fine adjustment controls.
  • Infinitely variable speed drive.
  • Maximum material thickness 150 mm (6").
  • 2.2 kW (3 HP) direct drive motor.
  • Water wash cleaning system with central water pipe C/W shut off to connect to main water inlet.
  • Safety shut off cord along the full length of the machine.
  • Safety covers over the glue rollers...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGS62HM] - 62" TOP AND BOTTOM HOT MELT GLUE SPREADER  Inventory #23454
MLS MACHINE DATA
  • Capacity 62" (1600 mm) wide top and bottom hot melt glue spreader.
  • Heated application rollers with a maximum temperature of 300F (150C) and diameter of 9.5"(240 mm).
  • Doctor roller diameters 7.5" (190 mm).
  • Heated application rollers heated by thermic oil with a 27 kW heater and a 2 HP (1.5 kW) circulation pump.
  • Main drive 3 HP (2.2 kW).
  • 3 roller 3"(80 mm) diameter infeed conveyors and 2 roller 3" (80 mm) outfeed conveyor each powered by a 2 HP (1.5 kW) motor and gearbox.
  • Variable speed from 3 - 80'/min. (1-25m/min.).
  • All specifications are subject to change without...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AS14] - 350 MM (14") SLITTER  Inventory #23518
MLS MACHINE DATA
  • Capacity max. process width 350 mm (14").
  • Max. material diameter 500 mm (20").
  • Material rolling speed 2-60 m/min. (7-196'/min.).
  • Cutting thickness 0.1-1 mm.
  • Material rolling motor power 3.8 kW.
  • Supplied with 21 knives.
  • Max. slits each time 20...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AS26] - 650 MM (26") SLITTER  Inventory #23517
MLS MACHINE DATA
  • Capacity max. process width 650 mm (26").
  • Max. material diameter 500 mm (20").
  • Material rolling speed 2-60 m/min. (7-196'/min.).
  • Cutting thickness 0.1-1 mm.
  • Material rolling motor power 3.8 kW.
  • Supplied with 40 knives.
  • Max. slits each time 39...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ACPTF48] - 4 X 8' THROUGH FEED COLD PRESS LINE 800 MM DAYLIGHT OPENING  Inventory #22890
MLS MACHINE DATA
  • Capacity end loading cold press, with platen size 4' X 8' , opening daylight 800 mm (29.9").
  • 3 cylinders with a stroke of 800 mm X 180 mm (29.9" X 7") diameter.
  • 150 ton.
  • All electrics CSA approved.
  • Special safety requirements must be specified by the customer at time of order.
  • Hydraulic pump 7.5 kW to allow a package of approx. 2 tones to be transferred through the press by means of a belt style conveyor built into the bed of the press feeding at approx 20 m/min. with a 2.2 kW (3 HP) motor.
  • One infeed and one outfeed power driven roller conveyor to load and unload the press , each supplied with one 2.2 kW (3 HP) motor and each conveyor measuring approx. 3200 mm X 1200 mm.
  • Note this machine must be loaded into a closed high cube container...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AHP5101HD] - 350 TON HEAVY DUTY SINGLE OPENING HOT PRESS  Inventory #22029
MLS MACHINE DATA
  • Capacity 350 ton.
  • 100 PSI.
  • 3200 x 1600, single opening hot press, 120°s Celsius, solid steel platens, platen thickness 42 mm.
  • Optional 60 mm platens (recommended) - $4,000.
  • 300 mm opening.
  • 8 cylinders with a diameter of 160 mm.
  • Outside diameter of cylinder housing is 190 mm.
  • The machine frame is of welded construction.
  • Heating pump 2.2 kW.
  • Hydraulic pump 7.5 kW.
  • Heating power 36 kW, $2000 to upgrade to 54 kW (recommended).
  • Side loading.
  • From the floor to the bottom of the platen when open is 1000 mm.
  • UL certified electric components, an extremely heavy duty press.
  • Please note that the pictures are not exactly as described above, as this is a custom made press and might vary according to a customer's required specifications.
  • Prices quoted in Canadian dollars are FOB West Coast Canada.
  • As we are constantly striving to improve our products we reserve the right to change or modify the specifications without prior notice...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AMP492] - SIDE LOAD TWO STATION VACUUM PRESS NO VACUUM PUMP  Inventory #23142
MLS MACHINE DATA
  • Capacity 3000 x 1350 mm (118" x 53") usable working table size, end loading on both 53" sides.
  • Able to load one set of parts while the machine is pressing the other tables parts .
  • Mechanisim, the vacuum comparment is lifted manually with the support of 2 shock absorbers.
  • The press is membraneless.
  • The laminate that is being laid up acts as the membrane, the laminate is placed in the top of the vaccum chamber with the parts to be laminated placed on the lay up table, the laminate is heated with top mounted heaters and the vacuum used to do the actual lamination comes from underneath the table, once the lay up procedure is complete the vacuum chamber is pushed manually into the press.
  • The control panel is front mounted with the following controls and gauges.
  • Voltage meter, 3 zone current meters.
  • Adjustable pre heat time with LED readout.
  • Adjustable temperature controls with LED readouts.
  • Adjustable pressing time with LED readouts.
  • Main heat control switch.
  • Vacuum control switch.
  • Press opening and closing switch.
  • Total power consumption 10 kW in set up mode and 3 kW during operation.
  • Vacuum -0.1 Mpa.
  • There is an observation window from the front of the machine...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ATFM45] - TRIM, DOWEL AND FINGER JOINT, MITRE FRAME DOORS  Inventory #22553
MLS MACHINE DATA
  • Capacity 3 HP motor for cut of saw.
  • Blade diameter 450 mm.
  • Spindle RPM 3000.
  • Drilling motor 3 HP with 4 spindle multi head.
  • Max. depth 70 mm.
  • Main motor 5 HP for finger joint spindle at 8,000 RPM.
  • Sliding table.
  • Overhead pneumatic clamp.
  • 45° trim.
  • All electrical controls, All specifications subject to change without notice...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AVG2] - 24" SINGLE KNIFE VENEER GUILLOTINE  Inventory #22779
MLS MACHINE DATA
  • Capacity 24"(600 mm) veneer guillotine, maximum cutting length 24" (600 mm) mm, 80 mm (3") stroke, maximum cutting thickness 50 mm (2"), minimum width of material that can be cut 25 mm (1"), total power 4 kW (5.6 HP).
  • Completly hydraulically operated, noise level 65 dB, heavy duty machine with a ball screw for the rear table pusher to give a precission cut, Siemens liquid crystal display for setting sizes to be cut with 8 programs that can be preset, front mounted control panel with 2 push buttons to set the guillotine knife in motion (must use 2 hands for safety reasons).
  • Pusher forward/reverse and safety stop, front mounted mechanical digital control for fine adjustment, chrome front tables, safety fence at rear of machine to protect against the blade, front mounted safety eye to stop the machine if there is anything in the way of the knife.
  • As we are constantly striving to improve our products we reserve th right to change or modify the specifications without prior notice...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AM79F] - MOULDER 7-HEAD 9" X 6" (B,R,L,R,T,T,B) C/W EXTENSIVE PACKAGE OF RECOMMENDED SPARE PARTS  Inventory #23652
MLS MACHINE DATA
  • Capacity 7-Head (B,R,L,R,T,T,B), 9" x 6" width/thickness.
  • Head sequence bottom 10 HP, right 10 HP, left 10 HP, right 10 HP, top 15 HP, top 15 HP, bottom 15 HP, mono-block cast iron bed, all heads have radial and axial adjustments with mechanical digital readouts on important spindle adjustments.
  • All spindles 40 mm diameter at 7,000 RPM.
  • Variable feed speed of 18 to 75 FPM.
  • 5 HP feed drive motor.
  • 5-1/2" diameter top and three sets of 4" diameter and 3-3/4" diameter bottom powered feed rollers for upgraded feeding performance.
  • 2 HP feed beam elevation motor.
  • 2 meter (6-1/2') infeed straightening table with adjustable fence line, chromed bed plates and fence line.
  • Centralized control panel & lubrication.
  • Pressure rollers and pressure plate.
  • Chipbreakers & full sound enclosure.
  • This machine comes C/W manual, tools and an extensive package of recommended spare parts...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGLSP31] - 31" TOP AND BOTTOM GLUE SPREADER C/W VARIABLE SPEED  Inventory #23812
MLS MACHINE DATA
  • Capacity (31") 4 roll top and bottom glue spreader.
  • Mechanical digital indicator.
  • 2 rubber rollers and 2 stainless steel doctor rollers, 7.5" diameter rubber rollers, shafts are made from hardened stainless steel, 6" diameter doctor rollers, manual fine adjustment controls, infinitely variable speed drive, maximum material thickness 80 mm (3.1"), 2.2 kW (3 HP) main drive motor, water wash cleaning system with single water connection and shut off to connect to main water inlet, safety shut off cord along the full length of the machine, safety covers over the glue rollers...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [ACL4] - 4 SPINDLE COPY LATHE WITH SANDING  Inventory #23829
MLS MACHINE DATA
">
  • Capacity 2 shaping spindles 7.5 HP, 7200 RPM.
  • Sanding heads 4 HP, 3600 RPM.
  • Feed motor 2 HP.
  • Shaper cutter 34 mm diameter.
  • Minimum working length 165 mm.
  • Maximum working length 900 mm.
  • Minimum working 30 mm diameter.
  • Maximum working 170 mm diameter.
  • Feed speed 3.6 IPM.
  • Counter pressure cylinder for smooth feeding.
  • Auto copy shaping from template.
  • Foot pedal controlled.
  • Adjustable copy pressure.
  • Individual clamping of each leg...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AFEUV24] - 24" 2 LAMPS UV DRYER  Inventory #23202
MLS MACHINE DATA
  • Capacity working width 600 mm.
  • Feed speed 5-30 m/min.
  • Feed power 0.75Kw.
  • 2 UV lamps 5.5Kw each.
  • Blower power 0.75 kW.
  • Total motor power 18.3 kW...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AHT] - 24" THROUGH FEED IR DRYER WITH AUXILLARY AIR HEATING  Inventory #23201
MLS MACHINE DATA
  • Capacity working width 600 mm.
  • Feed speed 5-30 m/min.
  • Feed power 0.75 kW.
  • Heating power 6 x 0.85 kW.
  • Total power 5.85 kW...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AGL242HM] - 24" DOUBLE SIDED HOT MELT GLUE SPREADER  Inventory #24009
MLS MACHINE DATA
  • Capacity 24" (600 mm) wide double sided hot melt glue spreader.
  • Heated application rollers with a maximum temperature of 300F (150C) and diameter of 9.5"(240 mm).
  • Doctor rollers diameter 7.5" (190 mm).
  • Heated application rollers heated by thermic oil with a 18 kW heater and a 2 HP (1.5 kW) circulation pump.
  • Main drive 3 HP (2.2 kW).
  • 3 roller 3"(80 mm) diameter infeed conveyors and 2 roller 3" (80 mm) outfeed conveyor each powered by a 2 HP (1.5 kW) motor and gearbox.
  • Variable speed from 3 - 80 '/min. (1-25 m/min.).
  • All specifications are subject to change without...
View Specifications >
Learn about Machines of Interest to Me >
FOX [SS2- 48] - 48" SEMI AUTOMATIC RING WRAPPER  Inventory #25909
MLS MACHINE DATA
  • Capacity to accommodate product: Width 45", max.
  • Height 5", Length 36" & up.
  • Controls: Main panel Nema 12 (16" x 12" cabinet on each unit).
  • FOX PC Logic Controller.
  • Main 240V/3PH/20A/60HZ disconnect switch.
  • Main fuses 20A.
  • Touch screen controls.
  • Auto/Manual Selector Switch.
  • Main control power push illuminated button.
  • Safety lockout switch on door (shuts off control power).
  • Jog ring push button.
  • Open close clamp.
  • Foot pedal run ring and sequence control.
  • All controls 12V DC.
  • Ring drive motor 1 HP DC 180V.
  • Film carriage home position detection.
  • Full detailed electrical schematic.
  • Electrical controls name brand.
  • Obtainable from local suppliers.
  • Ring: 48" ID precision machined steel ring.
  • Machined urethane ring support wheel with two sealed bearings (qty of 5).
  • 12" dual urethane drive wheels with 1-15/16" axles.
  • #50 chain and sprocket drive.
  • Ring speed from 0 to 50 RPM.
  • Pass through height of product at 36".
  • Ring support frame 1/4" steel plate reinforce with 2" x 2" x 3/16" HSS tube.
  • Mechanics: Pneumatic film clamp.
  • Pneumatic film cut with knife blade (fully guarded for operator protection).
  • Heavy duty 2" x 2" x 3/16" HSS tubing frame construction.
  • Fully guarded for operator protection.
  • Standard name brand parts which can be obtained from local supplier.
  • Film carriage: 10" mechanical "Dynamic" friction film carriage.
  • Supports film rolls 10" Film web width 9 1/2" diameter.
  • Easy fill tensioning adjustment.
  • Conveyance: Powered rubber roller on the in-feed and one powered rubber roller on the exit.
  • 1/2 HP 90V DC motors with variable speed...
View Specifications >
Learn about Machines of Interest to Me >
FOX [SS1-65] - 60" MANUAL RING WRAPPER  Inventory #25907
MLS MACHINE DATA
  • Capacity To accommodate product max.
  • Width 60", max.
  • Height 5".
  • Controls: Main panel Nema 12 (12" x 12" cabinet on each unit).
  • Main 220V/1PH/15A/60HZ disconnect switch.
  • Main fuses 15A.
  • Main control power push illuminated button).
  • Selector switch run ring - stop ring rotation.
  • All controls 120v AC.
  • Ring drive motor 1-1/2 HP DC 180V.
  • Full detailed electrical schematic.
  • Electrical controls name brand.
  • Obtainable from local suppliers.
  • Ring: 65" ID precision machined steel ring.
  • Machined urethane ring support wheel with two sealed bearings (qty of 4).
  • 12" dual urethane drive wheels with 1-13/16" axle.
  • #50 chain and sprocket drive.
  • Ring speed from 0 to 25 RPM.
  • Ring support frame 1/4" steel plate reinforce with 1 1/2" x 1 1/2" x 3/16" HSS tube.
  • Film carriage: 10" mechanical "Dynamic" friction film carriage.
  • Supports film rolls 9" diameter.
  • Easy fill tensioning adjustment.
  • One Idler roller on the in-feed and one idler roller on the exit to roll product over...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AM69] - MOLDURADORA 6 CABEZALES 9"X 6" (230 X 150MM)  Inventory #27298
MLS MACHINE DATA
  • Capacidad 6 Cabezales, 9" x 6" anchura/grosor.
  • Sequencia de cabezales, abajo 10 HP, derecha 10 HP, izquerda 10 HP, arriba 10 HP, arriba 15 HP abajo 15 HP, cama mono bloque en fierro fundido, todos los cabezales poseen un ajuste radial y axial con lectura digital mecánica en importantes ejes de ajuste,Todos los ejes de 40 mm de diametro a 7000 RPM.
  • Alimentación de velocidad variable de 18 a 75 pies por minuto.
  • Motor de alimentación 5 HP.
  • 5-1/2 diametro superior y tres series de 4"diametro y 3-3/4 diametro rodillos inferiores para un rendimiento de alimentación mejorada.
  • Viga alimentadora de preción superior, de elevación del motor 2 HP.
  • 2 metros ( 6-1/2') meza de entrada enderezadora con linea guia ajustable, placa de cama y guia de ajuste cromadas.
  • Panel de control & lubricación centralizado.
  • Rodillos y placas de preción.
  • Protector de astillas y aserrín hacia los motores, y caja de sonido completo.
  • Esta maquina viene con manuales y herramientas...
View Specifications >
Learn about Machines of Interest to Me >
FOX [C1PA] - FULLY AUTOMATIC PORTABLE WRAPPER  Inventory #29082
MLS MACHINE DATA
  • Capacity clamps/cuts & wipes (Pneumatic operated).
  • Fox unique cam operated film clamp assembly on FOX C1PA.
  • Fox "Linear" 20 inch powered pre-stretch film delivery system.
  • Suggested maximum load size 48"L x 54"W x 90" High.
  • 3 1/8" from floor to top of turntable.
  • Programmable Key Pad Controls.
  • LCD display screen.
  • Variable film carriage and turntable speed (0-15 rpm).
  • Seperate top/bottaom wrap selector.
  • Seperate film height selector 1-9".
  • Turntable jog with auto home alignment.
  • Triple beam auto height eye capable of recognizing all colors including black.
  • Weight capacity 5000 lbs.
  • Heavy duty 3/8" turntable plate.
  • Carriage chain fully guarded.
  • Pre-stretch 50-300% on request (200% standard setting).
  • 1/2 HP DC SCR variable speed film drive...
View Specifications >
Learn about Machines of Interest to Me >
ACTIVA [AEB1-HHB] - PORTABLE HOT MELT EDGEBANDER FOR CURVED OR STRAIGHT PARTS  Inventory #29498
MLS MACHINE DATA
">
  • Portable Hot-melt edgebander for the price of a hot-air machine.
  • Ideal for on-site repairs or specialty and custom banding.
  • Only 7 mins to warm up.
  • Type of edgebanding ABS, PVC, melamine and veneer.
  • Thickness 0.3 mm to 3 mm (1/64" to 1/8").
  • Edge bands width 10 mm -65 mm (3/8" - 2.5").
  • Edgebanding length 200 mm (8") to infinite.
  • Minimum inside radius 20 mm (3/4") depending on material.
  • Heater power 625 watts, feed power 20 watts, total power 645 watts.
  • Glue pot maximum temperature 200°s C (400°s F).
  • Glue pot capacity 320 ml (0.3 quarts).
  • Feed speed variable 2-6 m/min. (6 - 20'/min.).
  • Accessories included are, vacuum cup, electric trimmer, manual top and bottom trimmer and manual end trimmer.
  • And carrying case...
View Specifications >
Learn about Machines of Interest to Me >
Page 1 of 1  << First Page | < Prev. Page | Next Page > | Last Page >> 
* Price may vary with exchange rate.
USED WOODWORKING MACHINERY
USED WOODWORKING MACHINERY
Site last updated: May 23, 2013
 
USED WOODWORKING MACHINERY Surplus Woodworking Machinery   Industrial Woodworking Equipment   Woodworking Machinery
 
MLS Machinery Home -  New and Used Woodworking Machinery Catalog -  Advanced Woodworking Machinery Search
Meet your Product Specialist -  List Your Used Woodworking Equipment -  Woodworking Machinery We Are Looking For
Recent Arrivals -  Used Woodworking Equipment Specials -  New Woodworking Machinery
Services -  Used Woodworking Equipment Leasing -  Robotics and Automation
Used Woodworking Equipment Warranty Program -  eBulletin Sign-Up -  Auctions and Liquidations
Woodworking Industry and World News -  MLS Machinery USA
 
USED WOODWORKING MACHINERY Copyright ©2013 MLS MACHINERY Inc. All rights reserved. Privacy Statement, Terms and Conditions